Cables - (Wall to Floor)

Cables – (Wall to Floor)

Approx Lead Time - 3 Working Days

Wall to Floor Cables – Commonly used to suspend acrylic panels within Estate Agent ‘Walls’ – as a rule of thumb, you will need to order at least 2x units

 

  • Supplied = 1x (Wall to Floor Cable)
  • Supplied = 1x Cable @ 4M x 1.5mm & Wall & Floor connectors

 

Fitting:

  1. Connect 1st cable connector to your wall – drill holes & add raw plugs
  2. Repeat this exercise for your 2nd cable (if ordered)
  3. Now add the cables to the wall connectors
  4. At this point – you should have 2x cables hanging loose
  5. Now plumb both cables to the floor holders and cut-off any unwanted excess cable – that’s it

 

 

PDF Brochure
£22.00 +VAT

Product Information

OLD SOURCE CODE

Catalogue | Cable Components (x14) | (Wall to Floor) – Kit 3

(Wall to Floor) – Kit 3


Ref: CABLE-Wall-3


Price: ?20.00
(Excluding VAT at 20%)

Order Options
Option 1 Option 2
DisableOOSComponents(‘v_CABLE-Wall-3_1’); g_mapProds[‘CABLE-Wall-3’] = {“sProdRef”:”CABLE-Wall-3″,”nPrice”:2000,”sTax1Rate”:”20″,”sTax2Rate”:””,”nPricingModel”:2,”bOvrStaticPrice”:1,”bSequentialChoices”:1,”arrComps”:[{“sN”:”Selection”,”nP”:0,”nUI”:2,”hOS”:0,”aA”:[{“sN”:”Order Options”,”nUI”:1,”nCC”:3}],”mP”:{“1”:[0, “”],”2″:[0, “”]}}],”bAssemblyProduct”:0};


document.write(soapboxgetreviewhtml(0,0, “CABLE-Wall-3”, “(Wall to Floor) – Kit 3 “, 1,11, “”));

Details:
1. Wall to Floor Cable Connector
2. Perfect solution for overcoming possible angles

=======================================

Option 1 = Supplied 1x Unit = £20
Includes = 1x 4M Cable + 1x Wall Holder + 1x Floor Holder

Option 2 = Supplied 2x Units = £40
Includes = 2x 4M Cables + 2x Wall Holders + 2x Floor Holders

=======================================

Connection:
Action 1 – Secure to wall area
Action 2 – Decide on wanted cable length (cut as desired)
Action 3 – Secure to floor

Top Tip:
1. Acrylic Panels & LED Panels, require 2x cables!




How to Use:

Step 1:
Decide where the Universal Fitting is to be added, drill and raw plug or screw direct into wood, unscrew the top section and add a screw (supplied) secure to ceiling, then screw section with cable into this section, at this point you will have a cable hanging down.
Step 2:
Undo bottom section and add your own cable grippers – see ‘Related Products (if required)
Step 3:
Plumb cable and secure bottom section to floor / wall / window etc
Step 4:
Insert cable into bottom section, decide the length required of cable (nibble cable and repeat until you have the desired length) then, double check before cutting the cable as once cut, its cut!
Step 5:
Insert bottom section and tighten to tension the cable – that’s it
Remember:
To create a display, at least 2 of these kits are required to run either side of your poster holders.

Need more help? – Estate Agent Wall Displays – Consultation
We fully understand that each Estate Agent have their own unique Window & Wall measurements as no building is identical
To help solve this concern, follow these simple steps:

1. With this in mind UK Exhibition offer a “Free” cost calculation service:
2. Send an email to info@ukexhibition.co.uk
3. Tell us the wall(s) lengths and widths and of course the number of windows & walls required
4. Tell us if you want A4 Portrait or Landscape finishes
5. Tell us when you must have the products by
6. We will reply by email or direct call with your full costing…it’s that simple
7. By the way, on average we supply a minimum of 24 quotations per week and all for FREE

Catalogue | Cable Components (x14) | (Wall to Floor) – Kit 3